|Type||Wall Mounted Unit|
|Product Line||Halcyon HFI|
|Operating Mode||Heat Pump|
|Nominal Capacity (BTU)||7,000|
|Cooling Capacity (BTU)||7,000|
|Heating Capacity (BTU)||8,100|
|Moisture Removal (Pints/Hour)||1.7|
|Minimum Air Flow (CFM)||200|
|Maximum Air Flow (CFM)||330|
|Maximum Sound Level (dB)||37|
|Minimum Sound Level (dB)||25|
|Liquid Connection Size (Inches)||1/4|
|Suction Connection Size (Inches)||3/8|
|Product Height (Inches)||11 1/16|
|Product Width (Inches)||31 1/16|
|Product Depth (Inches)||8|
|Product Weight (Pounds)||18|
|Parts Warranty (Years)||5|
|Country of Origin||China|
Fujitsu has been striving to provide efficient and responsible heating and air conditioning solutions for decades. Their experience and dedication can be seen in the ASU7RLF Wall Mounted Mini Split Indoor Unit. This unit is compatible with single and multi-zone condensers, affording you the flexbility to use it in a variety of applications. The ASU7RLF is capable of cooling, drying, and heating operations. Between the advanced filtration technology and the additional operating modes, the ASU7RLF promotes health and comfort year round.
Fujitsu Mini Split Indoor Units have inverter technology, making them quieter and more efficient than typical mini split indoor units. Inverter units reach your desired temperature more quickly and are more resilient to temperature extremes.
The has two filters for keeping your home, or business, safe and clean. An ion deodorizing filter uses fine ceramic particles to capture and remove odors. This filter may be washed to increase longevity. An apple catechin filter isolates and deactivates mold, bacteria, and dust. The end result is a clean and healthy air flow from your .
With an , you can set a sleep timer to gradually decrease the heating or cooling output after you have gone to bed. It also supports a 24 hour timer, allowing designation of an activation or deactivation time once per day. These timers allow you to curtail energy use without sacrificing comfort.
Dehumidify and Cool
Dry mode demonstrates the 's versatility. In addition to providing moderate cooling, dry mode also dehumidifies your zone.
The airflow direction of this unit may be set to swing automatically. This disperses the hot or cold air evenly across your zone, resulting in consistent and thorough heating and cooling. The also supports manual control, allowing you to fine-tune the airflow direction.
Quiet Operating Mode
The may be set in a quiet operating mode. This operating mode limits airflow slightly to reduce fan noise from the unit.
The Fujitsu ASU7RLF is not a complete mini split system, only an indoor unit. A compatible Fujitsu Mini Split Outdoor Condenser is required to complete the system. Additionally, the following accessories are also required for installation:
Fujitsu General does not extend its manufacturer's warranty to products purchased over the Internet. The warranty on this product is provided by eComfort.com when installed by a professional HVAC contractor. Installation by others voids all warranties.
EZ-Roll - 15' Length - Ductless Mini Split Line Set - 1/4" x 3/8" Flare Connections - 3/8" Insulation
Kamco EZ-Roll - 15' Length - Ductless Mini Split Line Set - 1/4" Liquid Line x 3/8" Suction Line - Flare Connections - 3/8" Insulation
EZ-Roll - 25' Length - Ductless Mini Split Line Set - 1/4" x 3/8" Flare Connections - 3/8" Insulation
Kamco EZ-Roll - 25' Length - Ductless Mini Split Line Set - 1/4" Liquid Line x 3/8" Suction Line - Flare Connections - 3/8" Insulation
Mini Split Ductless Double Insulated Line Set - 1/4"x 3/8"-30'
EZ-Roll - 35' Length - Ductless Mini Split Line Set - 1/4" x 3/8" Flare Connections - 3/8" Insulation
Kamco EZ-Roll - 35' Length - Ductless Mini Split Line Set - 1/4" Liquid Line x 3/8" Suction Line - Flare Connections - 3/8" Insulation
EZ-Roll - 50' Length - Ductless Mini Split Line Set - 1/4" x 3/8" Flare Connections - 3/8" Insulation
Kamco EZ-Roll - 50' Length - Ductless Mini Split Line Set - 1/4" Liquid Line x 3/8" Suction Line - Flare Connections - 3/8" Insulation
Airtec WBB300 Outdoor Condenser Wall Bracket, supports up to 300 lbs., powdercoat finish, mounting width 3"-30", mounting depth 10.5"-16"
Thermo 18"x36"x2" Outdoor Condenser Plastic Pad
Fujitsu - UTY-RNNUM - Wired Remote Controller - For Select Single Zone and Multi-Zone Wall Mounted, Compact Ceiling Cassette, and Concealed Duct Mini Split Indoor Units
Fujitsu - UTY-RSNUM - Simple Wired Remote Controller - For Fujitsu ASU*RLF, ASU*RLS2, ARU*RLF, and AUU*RLF Mini Split Indoor Units
Fujitsu - UTY-XCBXZ1 - Interface Kit - For Fujitsu ASU7RLF, ASU9RLF, and ASU12RLF Mini Split Indoor Units
Fujitsu - UTY-XWZX - Dry Contact Wire Kit - For Fujitsu ASU*RLF, AUU*RLF, ASU*CL(X)1, and ASU30RLX Mini Split Indoor Units
Fujitsu - K3PST - 3-Pole Single Throw Safety Switch - For Fujitsu Mini Split Indoor Units
Fujitsu - K9R410A55 - R410A Swivel Adapter - For Fujitsu Mini Split Indoor Units
Bramec 5/8" ID Braided Vinyl Drain Tubing (per foot), Drain Tubing for Air Conditioners
1/2" x 4' Non-Metallic Electrical Whip Kit and Disconnect Box, Electrical Whip Kit + disconnect box for Mini Split Air Conditioners
Honeywell - 14/4 Connecting Wire - For Ductless Systems
We're sorry, the manuals for this product are not available at the manufacturer's request.
Send this page to a friend.