Kerdi Shower System Kit (32"x60" tray), Center Drain Placement

Schluter Shower System Kit includes:

• 1 - Kerdi-Shower - ST - Shower tray, 81 cm x 152 cm (32" x 60")
• 2 - Kerdi-Shower - SC - Shower curb, 122 cm x 15 cm (48" x 6" x 4-1/2")
• 1 - Kerdi 10M - Waterproofing membrane, 1 m x 10 m (3.3' x 33')
• 1 - Kerdi-Band - Waterproofing strip, 125 mm x 10m (5" x 33')
• 1 - Kerdi-Drain - Drain, with integrated bonding flange
• 4 - Kerdi-Kereck-FI - Pre-formed waterproofing inside corners
• 2 - Kerdi-Kereck-FA - Pre-formed waterproofing outside corners
• 1 - Kerdi-Seal-PS - 3/4" Pipe Seal
• 1 - Kerdi-Seal-MV - Mixing Valve Seal

The Schluter-KERDI-SHOWER-KIT is an all inclusive package containing each of the components required to create a maintenance-free, watertight shower assembly without a mortar bed.

Schluter-KERDI-SHOWER-ST are prefabricated substrates, made of expanded polystyrene foam, for tiled shower bases in conjunction with Schluter-KERDI waterproofing membrane and Schluter-KERDI-DRAIN. Schluter-KERDI-SHOWER-ST is a prefabricated, sloped shower tray that is specifically designed to accept the Schluter-KERDI-DRAIN and Schluter-KERDI waterproofing membrane. Schluter-KERDI-SHOWER-SC is a prefabricated curb that can be used with Schluter-KERDI-SHOWER-ST. Curb dimensions are 48" x 6" x 4-1/2" (122 cm x 15 cm x 11.5 cm).

The integrated Schluter-Shower System eliminates the potential for leakage, efflorescence, and mold growth in the system, is maintenance-free, and dramatically reduces total installation time to ensure success and make shower installation easier than ever. Schluter prefabricated shower substrates provide an alternative to shower bases constructed of mortar. The shower tray and curb are especially useful in large-scale, repetitive jobs, such as hotels, apartments, and condominiums for the significant time savings that can be realized.

• Schluter-KERDI is a polyethylene waterproofing membrane with a very low vapor permeance of 0.75 perms. The material is physiologically safe. Schluter-KERDI requires no special disposal. Schluter-KERDI is waterproof and resistant to most chemicals commonly encountered in tiled environments. It is resistant to aging and will not rot. Schluter-KERDI is highly resistant to saline solutions, acid and alkaline solutions, many organic solvents, alcohols, and oils. Information regarding its resistance to specific substances can be provided if concentration, temperature, and duration of exposure are known. For acid resistant coverings, use an epoxy adhesive to set and grout the tile.
• Schluter-KERDI meets the American National Standard for Load Bearing, Bonded, Waterproof Membranes for Thin-Set Ceramic Tile and Dimension Stone Installations (ANSI A118.10) and is listed by cUPC.
• The drain casing material is selected to match the plumbing system and attached using ABS or PVC cement. The simple connection to standard drain outlets makes KERDI-DRAIN suitable for new construction and renovation. The height adjustment collar, lateral adjustment ring, and strainer are made of ABS.
• The grate is available in stainless steel 304 (1.4301 = V2A) and in anodized aluminum with a brushed copper bronze, brushed brass, or brushed nickel finish.
• Schluter-KERDI-DRAIN is listed by UPC (IGC 195-2004), CSA (B79-94), and NSF (SE AD 130-007 and SE AD 130-0011).
• Relevant industry standard guidelines for floor drains with integrated bonding flange include method B422 in the Tile Council of North America's (TCNA) Handbook for Ceramic Tile Installation and Method 326DR in the Terrazzo, Tile and Marble Association of Canada (TTMAC) Specification Guide 09300 Tile Installation Manual.