"A" Series Belt-Drive Vertical Air Handler, Left Piping, 115V, 6 Coil Rows (4 CW 2 HW) - 5,000 CFM, 335,437 BTU

A vertical model of Belt-Driven Air Handlers for both hydronic and DX applications, these rugged units are dependable air handlers. Also in a heavy-gauge, galvanized steel cabinet, the Vertical Basic Belt Drive air handler (AV-B) includes all the same components as the Lanco Horizontal Basic model, only available as a vertical configuration. Access doors are provided on both sides of the unit for easy maintenance.

• Heavy-gauge galvanized steel cabinet insulated with 1/2" thick, over three-pound density, neoprene-coated fiberglass.
• Two-pipe or Four-pipe hydronic heating and/or cooling. Four pipe systems may be converted to a two-pipe system by capping off one set of pipes.
• Coils are 1/2" OD copper tube with aluminum fins (10 FPI) equipped with manual-air vent. Coils are 100% underwater pressure tested at 350 PSI with a 300 PSI working pressure.
• Galvanized drain pan is powder-coated epoxy with 1/4" thick elastomeric insulation and has primary and secondary drain connections.
• Belt-driven, draw-through design with forward-curved and dynamically balanced blowers.
• Wide range of motor sizes and adjustable, variable-pitch drive sheave and cast-iron pulley keyed to motor shaft (ordered separately & required for operation).
• Two-inch thick, 30/30 pleated filter, flatly mounted, with spring-loaded clips on each side of the access door for easy maintenance without the use of tools.

Kit Model # at Horsepower @ Inches of Static Pressure


• S16 operating at 2 hp @ 0.0
• S16 operating at 2 hp @ 0.1
• S16 operating at 2 hp @ 0.2
• S15 operating at 2 hp @ 0.3
• S15 operating at 3 hp @ 0.4
• S18 operating at 3 hp @ 0.5
• S18 operating at 3 hp @ 0.6
• S19 operating at 3 hp @ 0.7
• S19 operating at 3 hp @ 0.8
• S19 operating at 3 hp @ 0.9
• S41 operating at 3 hp @ 1.0

* Use with 3-phase motors only

• 1 Year