MXZ4B36NA Mr. Slim Dual/Tri/Quad Zone Outdoor Condenser - 36000 BTU
The Mitsubishi MXZ4B36NA Mr. Slim Dual/Tri/Quad Zone Outdoor Condenser - 36000 BTU is the deal solution for multiple applications, including residential, commercial and industrial. This Mitsubishi MXZ4B36NA Mr. Slim Outdoor Condenser will provide you with 36000 BTU of heating and cooling capacity.
This efficient and effective Mitsubishi Heat Pump System, featuring high reliability and rugged construction, provides an excellent choice where personal comfort and equipment cooling meet. Thanks to Mitsubishi Electric's 30 Years of Experience, proven INVERTER-driven compressors and electronic linear expansion valves, combined with advanced control and sensor technology, provide the right performance to meet critical loads in high reliability applications. This synergy of smart design and cutting-edge environmental technology delivered by the Mitsubishi MXZ4B36NA Mr. Slim Outdoor Condenser results in true eco-comfort for any space.
High sensible heat factors averaging over 75% of system-rated capacity can handle heat generated by computers, power supplies, and other electrical and mechanical devices. Full-capacity cooling output down to zero degrees outdoor ambient (with optional wind baffle installed) provides excellent heat transfer in indoor equipment rooms and critical service centers transferring heat gains outside.
Quick and easy installation is a significant consideration in new construction and even more important in renovation applications. The Mitsubishi heat Pump System installation procedures ensure minimal interruption of operations and activities in critical service applications. Mitsubishi Electric indoor units are easy to install practically anywhere:
Mini splits offer flexibility because they can be suspended from a ceiling, mounted flush behind a drop ceiling, hung on a wall or floor-standing. Mitsubishi Heat Pump Systems operate at low sound levels with indoor units producing decibels barely at a whisper level. Compare Mitubishi System sound levels to other common sounds:
The MXZ4B36NA Mr. Slim Outdoor Condenser uses Mitsubishi Electric's sophisticated electronic control systems, which detect any changes in room or zone temperature and, like a car's cruise control, automatically adjust the speed of the integrated INVERTER driven compressor in the outdoor unit and the electronic linear expansion valve (LEV) position for precise capacity control. This feature is unlike conventional units, which only start and stop the constant speed compressor repetitively. Special components within the compressor such as high density windings in the motor increase the magnetic flux and artificial magnets in the rotor to reduce its weight, allowing the compressor to operate at higher energy efficiencies with better performance than ever before, while producing low sound levels both during start-up and while running.
To complete the Mitsubishi MXZ4B36NA Mr. Slim Outdoor Condenser consider to add the following accessories that are required to complete every mini split system installation:
By adding the required accessories to the Mitsubishi MXZ4B36NA Mr. Slim Outdoor Condenser you are receiving a complete cooling/heating solution completely ready for installation, so your contractor does not need to purchase required Mitsubishi Accessories to finish the installation. Please note that indoor units receive power directly from an Outdoor Unit.
Important Note: The Mitsubishi MXZ4B36NA is not a complete mini split system. It contains only the MXZ4B36NA Outdoor Unit and requires a compatible Mitsubishi Mini Split Indoor Unit.
|
|
$160.00
Add to cart
|
|
Diversitech 5/8" ID Vinyl Drain Tubing (per foot), Drain Tubing for Air Conditioners
|
$1.00
Add to cart
|
|
Honeywell 14/4 Connecting Wire for Sanyo,Mitsubishi,Fujitsu, Daikin Mini Split System, Connecting Wire for Air Conditioners
|
$1.65
Add to cart
|
|
1/2" x 4' Non-Metallic Electrical Whip Kit and Disconnect Box, Electrical Whip Kit + disconnect box for Mini Split Air Conditioners
|
$25.95
Add to cart
|
|
Thermo 36"x36"x2" Outdoor Condenser Plastic Pad
|
$50.95
Add to cart
|
|
Airtec WBB300 Outdoor Condenser Wall Bracket, supports up to 300 lbs., powdercoat finish, mounting width 3"-30", mounting depth 10.5"-16"
|
$61.90
Add to cart
|
| MXZ4B36NA Outdoor Unit Performance: | |
| Rated Cooling Capacity (BTU): | 36000 |
| Cooling Capacity Range (BTU): | 12,600 - 36,400 |
| Cooling Total Input (W): | 3,940 |
| Rated Heating Capacity (BTU): | 36,000 |
| Heating Capacity Range (BTU): | 11,400 - 43,000 |
| Heating Total Input (W): | 3,100 |
| MXZ4B36NA Outdoor Unit Power: | |
| Power Supply: | 1-phase, 60Hz, 208 / 230V *2 |
| Voltage Indoor - Outdoor S1 - S2: | AC 208 / 230V |
| Voltage Indoor - Outdoor S2 - S3: | DC12-24V |
| MXZ4B36NA Outdoor Unit Specifications: | |
| MCA (A): | 19 |
| MOCP (A): | 20 |
| Fan Motor (FLA): | 0.93 |
| MXZ4B36NA Outdoor Unit Specifications: | |
| Compressor Type: | DC Inverter-driven Twin Rotary |
| Compressor RLA: | 14.4 |
| Compressor LRA: | 15 |
| Airflow Cooling/Heating (CFM): | 2,068/2,068 |
| Refrigerant Control: | Linear Expansion Valve |
| Defrost Method: | Reverse Cycle |
| Cooling Sound Pressure (dB): | 54 |
| Heating Sound Pressure (dB): | 57 |
| External Finish Color: | Munsell No. 3.0Y 7.8 / 1.1 |
| MXZ4B36NA Outdoor Unit Dimensions: | |
| Width (Inches): | 35-7/16 |
| Depth (Inches): | 12-5/8 |
| Height (Inches): | 35-7/16 |
| Weight (lbs): | 153 |
| Number of Indoor Units: | 2, 3, 4 |
| MXZ4B36NA Refrigerant Specifications: | |
| Refrigerant Type: | R410A |
| Refrigerant Charge (Lbs, Oz): | 8, 13 |
| MXZ4B36NA Outdoor Unit Connections: | |
| Gas Side O.D. (Inches): | A: 1/2, B,C,D:3/8 |
| Liquid Side O.D. (Inches): | 1/4 |
| Max Height Difference (Feet): | 49 |
| Max Total Length (Feet): | 230 |
| Mitsubishi Warranty: | |
| Compressor: | 7 Years |
| Parts: | 5 Years |