Your Browser is Not Currently Supported

We recommend using one of the following browsers for an optimal experience. Click a link below to download the latest browser version.

If you are already using one of these browsers, please make sure you're updated to the latest version.

Type -
Maximum Input Capacity (BTU) Learn More
Maximum Input Capacity (BTU)
The Maximum Input Capacity describes how quickly the appliance will use fuel when delivering it's maximum capacity. The units may change depending on the fuel being used.
-
Vent Type Learn More
Vent Type
Products that use combustion (burning) of fuel to create heat also create potentially dangerous gasses that need to be exhausted (AKA "Vented"). Depending on the product, venting can be done via a chimney, through a side wall, or use a second vent to provide fresh air to the appliance.
-
Fuel Type Learn More
Fuel Type
To create heat, some form of fuel is required. Fuel Type specifies what the product uses as an input to create heat.
-
Configuration Learn More
Configuration
Orientation describes the direction that air will flow through a piece of equipment. (e.g. air will flow horizontally through a "Horizontal" unit heater.) Most equipment will only function properly if installed in the proper orientation.
-
Air Throw (Feet) -
Product Line +
Product Height (Inches) +
Product Width (Inches) +
Product Status

Modine Reviews

Type -
Maximum Input Capacity (BTU) Learn More
Maximum Input Capacity (BTU)
The Maximum Input Capacity describes how quickly the appliance will use fuel when delivering it's maximum capacity. The units may change depending on the fuel being used.
-
Vent Type Learn More
Vent Type
Products that use combustion (burning) of fuel to create heat also create potentially dangerous gasses that need to be exhausted (AKA "Vented"). Depending on the product, venting can be done via a chimney, through a side wall, or use a second vent to provide fresh air to the appliance.
-
Fuel Type Learn More
Fuel Type
To create heat, some form of fuel is required. Fuel Type specifies what the product uses as an input to create heat.
-
Configuration Learn More
Configuration
Orientation describes the direction that air will flow through a piece of equipment. (e.g. air will flow horizontally through a "Horizontal" unit heater.) Most equipment will only function properly if installed in the proper orientation.
-
Air Throw (Feet) -
Product Line +
Product Height (Inches) +
Product Width (Inches) +
Product Status
Filter